Make alternative for webhook, Slack and API flows without a scenario graph
Make is a powerful visual builder, and for many teams that power is the problem. Adapter.to runs the flows most small teams actually need (a webhook, schedule or RSS trigger, then Slack, Discord, Telegram, email or an API call) as a simple straight line, and counts only the actions you send.
Plans from 5,000 tasks for $24 a month billed yearly. Triggers, filters and formatting never count as tasks.
Webhook in, filter, reshape, send. A real flow from the editor
Every new account gets 100 trial tasks and 2 active flows. Plans start at $24 a month billed yearly for 5,000 tasks.
The short answer
Make is cheaper per unit than Adapter.to: Core is $9 a month billed yearly for 10,000 credits, against $24 for 5,000 tasks here. The reasons to switch are not price. Make uses a credit for the trigger on every run, builds scenarios as graphs of modules, routers and iterators, and stops scenarios when credits run out. Adapter.to counts only the actions after the trigger and keeps runs over the limit instead of billing overage.
Why people look for a Make alternative
People rarely leave Make because it is expensive. Core at $9 a month is one of the cheapest entry prices in the category. They leave because the tool asks for more than the job needs. A scenario is a graph: modules, bundles, routers, iterators and aggregators, and a credit is spent on almost every module that runs. A flow that should be "when this webhook arrives, tell the sales channel" becomes a canvas to maintain.
The second reason is counting. On Make the trigger module is a module like any other, so a webhook scenario with two actions uses three credits per run. Credits are cheap, but you cannot read the plan number against the work you can see. The third is the free plan: 1,000 credits and a 15 minute minimum interval, which rules it out for anything that has to react quickly.
If your automations are notifications, alerts, lead routing and forwarding data between your own systems, a narrower tool is easier to hand to a colleague. That is the job Adapter.to was built for.
Every Make tier and what uses a credit is in our Make pricing breakdown.
Make and Adapter.to compared on the same store
The comparison uses the small online store from our pricing articles. About 3,000 orders a month arrive by webhook and are logged to an API, 600 large orders also post a Slack alert, 400 contact form leads are emailed to sales and posted to a channel, and a daily report is pulled from an API and posted to Slack.
On Make that is 7,860 credits a month, because every trigger counts, so it fits Core 10K at $9 a month billed yearly. On Adapter.to the same work is 4,460 tasks and fits Starter at $24 a month billed yearly or $49 monthly. Make is cheaper for this store and we say so plainly. What you get for the difference is a flow you can read in ten seconds, a run history that shows the data each step sent and received, and one-click replay of any run.
| Make | Adapter.to | |
|---|---|---|
| Entry paid price | $9 a month billed yearly, $10.59 monthly, 10,000 credits | $24 a month billed yearly, $49 monthly, 5,000 tasks |
| Is the trigger counted | Yes, a credit on every run | No |
| Free plan | 1,000 credits, 15 minute minimum interval | 100 tasks and 2 active flows to test with |
| Builder | Graph of modules, routers, iterators, aggregators | Straight line, trigger then filters then actions |
| When the limit is reached | Scenarios stop until credits are added | New runs are held in history, no overage charge |
| Apps | Large native library | Ten live connectors plus HTTP Request for any REST API |
| Loops and branches | Yes | No |
| AI content studio | No | Included in every paid plan |
Make figures from the plan data on make.com/pricing (October 2026 version, the live page blocks automated reads), Adapter.to figures from our pricing page. Sources: Make pricing, Make credits documentation, Adapter.to pricing.
What a flow looks like on Adapter.to
Every flow is a straight line. A trigger starts it: a Catch webhook with its own private URL accepting GET, POST, PUT and PATCH up to 256 KB, a schedule from every 5 minutes (every minute on Pro) to daily or weekly, or an RSS feed with one run per new item. Filter stops runs that do not matter and Formatter changes case, trims, finds and replaces, extracts an email or URL, does arithmetic and shifts dates. Neither uses a task.
The actions are Slack, Discord, Telegram, Email by Adapter, Send webhook and HTTP Request, which calls any REST API with bearer or basic authentication. Send one test request and the editor keeps it as sample data, so you map real fields instead of guessing the shape.
- Tasks equal the messages and requests you send, with triggers, filters and formatting free
- Runs over the plan limit are held in history with a task limit status, never billed as overage
- Plans from 5,000 tasks and 20 active flows, up to 100,000 tasks with three seats on Team
- AI content studio included in every paid plan, which Make does not offer
Start from the webhook to Slack template or the RSS feed to Slack template. Limits for each plan are on the pricing page.
Where Make is the better choice
Make wins whenever the automation is not a straight line. Routers send one run down different branches, iterators and aggregators loop over lists and rebuild them, and data stores keep state between runs. It also reaches far more apps through native modules. Adapter.to has ten live connectors today (Webhooks, HTTP Request, Schedule, RSS, Email by Adapter, Filter, Formatter, Slack, Discord and Telegram), and everything else goes through HTTP Request, which is more work for apps with poor API documentation.
So if a workflow loops over order lines, branches on customer type or leans on a dozen app modules, stay on Make or look at Zapier or n8n. If it is a trigger and a message, you are paying for a canvas you do not use.
Side by side prices for all four tools are in the Zapier alternative comparison, and teams that need code steps should read the n8n alternative page.
How to move a Make scenario to Adapter.to
Pick the scenario that fires most often and has the fewest modules. Create a flow with the Catch webhook trigger and copy its URL. Add it next to the Make webhook in the sending app and let both run for a day. Rebuild any filter as a Filter step, field cleanup as Formatter, and the final module as Slack, Discord, Telegram, email or HTTP Request. Compare the two run histories line by line.
When the outputs match, point the sender only at Adapter.to and switch the Make scenario off. Scenarios with routers or iterators are the ones to leave where they are.
Questions buyers ask
All questionsWhat is the best alternative to Make?
It depends on the workflow. For webhook, schedule and RSS flows that end in Slack, Discord, Telegram, email or an API call, Adapter.to counts only the actions you send, from $24 a month billed yearly for 5,000 tasks. For loops, branches and many app modules, Zapier or n8n fit better.
Is Adapter.to cheaper than Make?
No. Make Core is $9 a month billed yearly for 10,000 credits, which is cheaper than Adapter.to Starter at $24 for 5,000 tasks. Adapter.to makes sense when you value a simpler builder, a task count that excludes triggers and held runs instead of stopped scenarios.
Does Make count the trigger as a credit?
Yes. On Make the trigger is a module, so a scenario with a webhook trigger and two actions uses three credits per run. Routers and error handlers do not use credits. Adapter.to and Zapier count only the actions after the trigger.
Can I import Make scenarios into Adapter.to?
Not automatically. Rebuild the scenario as a flow: webhook trigger, optional Filter and Formatter, then the final action. Most short scenarios take about ten minutes. Scenarios that rely on routers, iterators or data stores have no direct equivalent here.
What happens when I hit my limit on Adapter.to?
New runs are kept in history with a task limit status and nothing is billed as overage. Upgrade the plan or wait for the next month and replay the held runs. Make stops scenarios until credits are added or topped up.
Rebuild your busiest Make scenario in ten minutes
Create an account, copy your private webhook URL and run it next to Make until the run histories match. 100 tasks and 2 active flows to test with real data.